For some farmers, there was only one shortcoming. It wasn’t built to go between rows once crops like corn and soybeans were planted. Well, the wait for those farmers is over!

Row Crop Options Now Available

The AXION 900 TT – TERRA TRAC option – is now available on 18-inch belts on 88- and 120-inch centers, in addition to the previous track widths of 25, 29 and 35 inches. The AXION 960TT and 930TT models, which are equipped with a four-mode, continuously variable CMATIC transmission, offer 445 and 355 hp, respectively.

“We are excited to bring these latest technologies to the market, with a focus on strength and efficiency,” says Eric Raby, Senior Vice President ­– Americas, for CLAAS. “The introduction of the new XERION and ARION tractor lines and row-crop technology for our AXION line adds game-changing productivity for farmers throughout North America.

More Power + Performance

Experience more pulling power, efficiency and torque than competitive brands with the 8.7 L FPT engine and go from 0 to 31 mph with the continuously variable CMATIC transmission standard on both CLAAS AXION 960 and 930 TERRA TRAC model options. The AXION 960 TT delivers 440 rated hp, more than many competitive models in the same size class. 

Achieve Higher Yields

Third-party agronomists planted canola with the same implement and three different tractors in the same field in south-central Manitoba, CA in June 2022. They also calculated the yield at harvest in October 2022. An average of two more bushels per acre were harvested where the AXION 930 TERRA TRAC planted. Over 1,000 acres at a value of $15/bu, the reduced compaction offered by the AXION 930 TERRA TRAC added up to $30,000 in increased profits. 

Save More Fuel

Fuel efficiency is a vital part of our commitment to your farming operation.  That’s why we challenge ourselves to find new and improved ways to make the AXION tractor the most fuel efficient in agriculture. Our CMATIC transmission and strategically designed fuel map are two of the reasons why CLAAS tractors lead the way in this category.

Make the Shift to CVT

Better transfer the engine’s torque and power with a full 4-mode continuously variable CMATIC transmission. Compare this to other manufacturers’ CVT transmissions with only one or two modes. This hydromechanical CVT designed in-house gives you better efficiency because the transmission is never more than 40% hydraulic drive and never less than 60% mechanical drive. 

Increased Track Lifespan

Because there are 33% less bends in this track system, operators will experience 20% less heat build-up than many “triangle track” tractors, which can significantly decrease the lifespan of your tracks and force you to work in shorter durations, especially if you’re roading quite a bit and have a lot of area to cover

Minimal Berming

The front wheels of the CLAAS tractor working together with the TERRA TRAC system designed specifically for the AXION tractor reduce compaction when it comes to turning at the headlands.

Superior Suspension

Four-point suspension, fully suspended tracks and a strategically designed cab placement make the operator experience in the AXION 900 TERRA TRAC second to none!

With plenty of power to spare, this tractor is proof that you can have a fully capable machine while increasing productivity, lowering fuel costs and improving operator comfort. See what good doing better can do at a dealer near you.

"We know that time is money. This mower with a conditioner and merger is rugged enough to handle high tonnages of cereal crops like rye or triticale and gentle on legumes such as alfalfa,” said Mark Scuffham, Product Manager for CLAAS of America. “The DISCO 9700 RC AUTO SWATHER sets new standards when it comes to performance.”

The latest mower/conditioner/swather in the DISCO lineup is designed for professionals, featuring a working width of 28’10” up to 31’2” (8.80 to 9.50 m). Its ACTIVE FLOAT ground-pressure system ensures proper cut height over variable terrain. A roller conditioner with double roller drive (DRD) ensures efficient dry down in individual windrows or flexible, high-performance AUTO SWATHER merger belts, gently move the crop into a single windrow.

Capacity to Spare

The DISCO 9700 RC AUTO SWATHER has been designed specifically for large forage volumes and heavy crops up to 25 t/ac (60 t/ha) that require gentle mowing, conditioning and merging. While it's ideal for handling alfalfa, it's also rugged enough to tackle high-tonnage cereal crops like rye or triticale. The transmission and drivetrains feature telescopic drive shafts developed jointly with Walterscheid. With specially hardened large-diameter steel profiles they are designed for use with tractors of up to 500 hp. And the new bolt-on friction clutches make maintenance a breeze. The innovative drive line makes the DISCO 9700 RC AUTO SWATHER the most powerful mower with conditioner and merger belts on the market.

Cutting Edge Crop Flow with unique double-roll drive

The DISCO 9700 RC AUTO SWATHER features a highly efficient linear crop flow design. The roller conditioners are driven by a double roller drive with scissor gearboxes. This unique design ensures maximum throughput and durability even in the heaviest crop. The spring tension of the rolls as well as the conditioner gap is easily adjustable with a ratcheting wrench that comes with the mower. 

Capable Conditioning and Merging

The conditioner on the DISCO 9700 RC AUTO SWATHER spans almost the entire width of the cutterbar to allow for a continuous linear flow without blockages. Optimized crop transfer to the 43.3”- (1100 mm-) wide reinforced merger belts ensures uniform filling of the AUTO SWATHER merger belts. This produces even, fluffy windrows which allow the forage harvester to run at peak efficiency. One or both belt units can be hydraulically folded up from the comfort of the cab. This is particularly helpful if a faster dry down is needed. 

Handling Highlights

The DISCO 9700 RC AUTO SWATHER showcases innovative new components with proven DISCO features including: 

• Variable working width: 27.5 inch (700 mm) side shifting by centrally positioned swing arms enables a larger overlap on side slopes and curvy headlands to keep your cut clean 
• MAX CUT Cutterbar: Base and cover stamped from a single piece of steel with no welded joints, bolted together for maximum impact resistance
• Quick knife change and color-coded knife blades make changing knives a breeze
• SAFETY LINK shear safety modules protect the cutterbar in the event of an impact
• 850 rpm PTO speed for reduced fuel consumption by 22% when running at 850 rpm instead of 1000 rpm
• Wide variety of wear skids available to increase cutting height for less ash content and faster regrowth
• ACTIVE FLOAT suspension with optional slope control for hilly terrain and continuous pressure monitoring ensures optimum ground pressure at all times for uniform cutting even at high working speeds, minimum ash content and reduced drift on slopes
• Hydraulic non-stop collision protection swings the rear mowers back and over in case of an obstacle to eliminate or reduce costly damage from collisions
• Drive train with new Walterscheid triple telescopic drive shafts, specially toughened large-diameter steel profiles and new K-90 friction clutch for high reliability

If you are a little more “hands-on” than some operations, here are a few simple maintenance tips and reminders to keep your combines and forage harvesters in shape, stored and ready.

Refer to your Operation and Maintenance Manual for operation, maintenance and safety information.

Combine Post-Harvest Inspection

Forage Harvester Post-Harvest Inspection